It sounds like you are looking for the Custom Wiring Harness for Putco Blade Tailgate Light Bars # P529005 which is a custom fit part confirmed to fit a 2019+ GMC Sierra/Chevrolet Silverado. This harness is designed to plug into the harness of your 2021 GMC Sierra which will keep your truck from recognizing the light bar as a trailer, and will not take up your vehicles existing trailer connector.
This kit is designed for Putco or Blade Tailgate Light Bars like the Putco Blade LED Tailgate... view full answer...
The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55384 will work perfectly with a light bar but it will give the trailer connected on the dash and the other trailer associated changes that your truck recognizes. The only way around that is to splice the tailgate light bar pigtail into the factory wiring so the sensors don't get triggered for the trailer compatible electronics. For your tailgate light bar on your 2018 Ford F-250, I... view full answer...
The vast majority of tailgate light bars like the Rampage SuperBrite LED Tailgate Light Bar part # RA960134 come with a wiring harness that has a built-in trailer connector so you can plug them into the the rear of the vehicle without splicing. If you for some reason have a tailgate light bar without built-in trailer connector, you should be able to add one using something like the Wesbar 4-Pole Flat Connector part # W787264.
If this wasn't what you were looking for please just let me... view full answer...
The Putco Red Blade LED Tailgate Combination Light Bar # P92010-60 that you referenced has turn signals that are amber, running lights that are red, brake lights that are brighter red, and reverse lights that are white. view full answer...
Yes, the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 41165 would easily have enough amperage to power an LED tailgate light bar and LED trailer lights. view full answer...
The Putco Red Blade LED Tailgate Light Bar # P92010-60 that you referenced could install at the rear of a 1997 Monaco Dynasty RV. It would be just a matter of tapping into the trailer taillight circuits to power the light bar instead of a vehicle's taillight wiring. view full answer...
Online instructions for the Rampage SuperBrite LED Tailgate Light Bar # RA960137 aren't available but I can walk you through the install process. Basically you just plug the 4-way trailer style connector of the light into the 4-way of your truck after peeling back the adhesive backing on the lightbar and pressing it to the gap between the rear bumper and the truck's tailgate and you're set. You'll want to make sure your vehicle is clean where you will be installing the light bar as well. view full answer...
You would not have any issue using the 4-way adapter part # C55384 as a way to power your tailgate lightbar while your 7-way powers the boat trailer lights. This is a common solution for your setup that would work just fine. Your boat trailer having LED lights would mean they draw considerably less too so you wouldn't have an amperage draw issue either. view full answer...
We do!
I recommend checking out the Rampage SuperBrite LED Tailgate Light Bar # RA960135 for your 2008 Mazda B4000 4x4 pickup. This carries the basic stop, turn, tail lighting and is powered by your 4-Way flat connector. If you don't already have a 4-Way flat on your Mazda you'll also need the T-One Wiring # 118325 which tees into your OEM wiring connector and runs the wiring through a converter to protect the factory wiring on your vehicle.
Attached are some videos for you to check out. view full answer...
The 3M adhesive that the Rampage SuperBrite LED Tailgate Light Bar # RA960137 uses to secure to the rear of a vehicle is safe on clear coat. Removing it later would not cause any issues with the paint. view full answer...
It sounds like you're wanting to install a tailgate light bar like the Putco Blade LED Tailgate Light Bar part # P92009-48 on a 2019 Ford Ranger. If that is the case then most of these light bars will simply plug into a 4-way trailer connector like the above. Therefore, all you'll need is the 4-way for the vehicle assuming you don't already have one. In order to obtain this, you'll need the T-One Vehicle Wiring Harness with 7-Way Trailer Connector part # 22124 and 7- and 4-Pole Trailer... view full answer...
There is one tailgate LED light bar confirmed to work with your 2020 Ford F-150 Super Crew with BLIS(Blind Spot Information System) and the other factory options, which is the Putco Red Blade LED Tailgate Light Bar # P92010-60.
Putco has a 100% guarantee that it will work with the 2015+ F-150s and 2017+ Super Duty trucks.
With that said, there is not a custom harness to install the # P92010-60 at this time, as it will need to be installed using the included quick splices to not interfere... view full answer...
Sounds like you would be looking for a longer tailgate style light bar like the part # RA960135. This will plug into a truck's 4-way to provide the truck with left turn, right turn, stop and running light functions. view full answer...
I recommend using the T-One Vehicle Wiring Harness # 118384 with the Rampage SuperBrite LED Tailgate Light Bar # RA960134. This will allow you to easily hide all the wiring as well as not lose your connector for towing. Since it simply connects in line of your current trailer connector there is no wire splicing required.
With the factory 4-Way/7-Way connector on your 2017 Ram 1500 like the Hopkins # HM40975, you will not be able to fully open both the caps as they share the same hinge. view full answer...
On your 2006 Ford F-150, if you don't have the factory 7-way then you can use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56031 to run your LED light bar. The factory wiring to connect to is located behind the rear bumper.
If you do have the factory 7-way, then I recommend the Reese Replacement Multi-Tow 7-Way & 4 Pole Trailer Connector # 74682 which will give you the 7-way at your bumper and the hidden 4-way to give you a clean light bar connection. view full answer...
No you would not need to install a resistor on your taillight wiring when installing the Putco PURE Tailgate LED Light Bar # P940015 that you referenced. It would wire in like normal and would function well. view full answer...
The Rampage SuperBrite LED Tailgate Light Bar # RA960134 is a confirmed fit for your 2016 Ram 1500 and does not require any adapters based on how your vehicle is optioned as well. view full answer...
Sounds like you are in need of a 4-way trailer wiring harness on your 2005 Jeep Grand Cherokee. For that you would want to use the Tekonsha kit part # 118394 which is a confirmed fit. Now if you want to tap into the reverse light circuit you will need to find that circuit on your vehicle by testing the wires that run into the reverse lights with a circuit tester like part # 3808. The wire that sees voltage when the vehicle is put in reverse is the one to attach to the white wire of your... view full answer...
The closest option we have is the Putco Red Blade LED Tailgate Light Bar - Stop, Tail, Turn, Backup - 44" Long # P92010-44 which has the brake lights, turn signals, tail lights, and even back up lights if you choose. The only differences in this light bar is 44" long so it will be a little above the 3' you mentioned.
To install the # P92010-44 you can add a 4-way connector to the rear of your 5th wheel trailer using the 4-Pole Hardwire Kit with Circuit Tester # 18252, or you can use #... view full answer...
For your 2012 Nissan Frontier with 59-5/8 inch tail gate, I recommend using the Rampage SuperBrite LED Tailgate Light Bar - Stop, Tail, Turn, Reverse - 4-Pole Flat - 49" Long, # RA960137. This will allow you to use all the functions you want. I highly recommend hardwiring this to the wires just before your 7 way connector to still give you your trailer connection. You can tap into the running lights, turn signals, brake lights and reverse light functions right there without running extra... view full answer...
Go To Results